Inconel 625 Round Bars, Inco 625 Flat Bar, Inconel Bar Manufacturer | Supplier

Inconel 625 Round Bars

Inconel 625 Round Bars Manufacturer & Supplier

Inconel 625 Round Bars

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Inconel 625 Round Bars Manufacturer, supplier, exporter, trader, wholesaler, stockiest in india

Inconel 625 Round Bars Manufacturer & Supplier is non magnetic, corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Alloy 625 Rounds Bars Manufacturer has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 Round Bars Supplier is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Size Specifications for Inconel 625 Round Bars Manufacturer & Supplier: 6mm upto 260mm

Size Specifications for Inconel 625 Square, Flat, Rectangular Bars Manufacturer & Supplier : 6mm upto 100mm in thickness, 3000mm to 6000mm length(can be Customized)

Size Specifications for Inconel 625 Hollow Bars Manufacturer & Supplier: 50mm upto 400mm in diameter as welded hollow bars & 2inch to 20inch diameter as seamless hollow bars

Size Specifications for Inconel 625 Hollow Rings Manufacturer & Supplier: 50mm upto 400mm in diameter as welded hollow rings & 2inch to 20inch diameter as seamless hollow rings

Chemical Composition (Chemistry) of Inconel 625 Round Bars Manufacturer & Supplier in India:
















Columbium + Tantalum



























Different Designations of Inconel 625:

UNS N06625, ASTM B446, AMS 5666, BS3076, AMS 5837, ASTM B443, AMS 5599, BS3072, ASTM B443, ASTMB444, ASTM B704, AMS 5581, BS3074, GEB50TF133,ASTM B366, DIN 17754, 2.4856

Client can procure smaller quantities of Inconel 625 Round Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.


Inconel 625 Round Bars

Inconel 625 Round Bars Manufacturer

Inconel 625 Round Bars Supplier

Inconel 625 Round Bars Stockist

Inconel 625 Round Bars Wholeseller

Inconel 625 Round Bars Trader

Inconel 625 Round Bars Dealer

Inconel 625 Round Bars Distributor

Inconel 625 Round Bars in Mumbai

Inconel 625 Round Bars Manufacturer in Mumbai

Inconel 625 Round Bars Supplier in Mumbai

Inconel 625 Round Bars Stockist in Mumbai

Inconel 625 Round Bars Wholeseller in Mumbai

Inconel 625 Round Bars Trader in Mumbai

Inconel 625 Round Bars Dealer in Mumbai

Inconel 625 Round Bars Distributor in Mumbai

Inconel 625 Round Bars in India

Inconel 625 Round Bars Manufacturer in India

Inconel 625 Round Bars Supplier in India

Inconel 625 Round Bars Stockist in India

Inconel 625 Round Bars Wholeseller in India

Inconel 625 Round Bars Trader in India

Inconel 625 Round Bars Dealer in India

Inconel 625 Round Bars Distributor in India

Corrosion Resistance properties of Inconel 625 Round Bars Manufacturer:

Alloy 625 Round Bars Manufacturer has withstood many corrosive environments. In alkaline, salt water, fresh water, neutral salts, and in the air, almost no attack occurs. The nickel and chromium provide resistance to oxidizing environments. Nickel and molybdenum provide for resistance to nonoxidizing atmospheres. Pitting and crevice corrosion are prevented by molybdenum. Niobium stabilizes the alloy against sensitization during welding. Chloride stress-corrosion cracking resistance is excellent. The alloy resists scaling and oxidation at high temperatures.

Pickling properties of Inconel 625 Rod Manufacturer & Supplier:

Sodium hydride baths are necessary to descale this alloy. After the sodium hydride treatment, the material should be immersed in a sulfuric acid bath 165°F (74°C) for approximately 3 minutes. A 25-minute immersion in a nitric-hydrofluoric bath 145°F (63°C) is then necessary. Rinse. Sulfuric solution: 16% by weight, H2SO4. Nitric solution: 8% HNO3 by weight and 3% HF by weight. Acid etching for macro-inspection-expose material electrolytically to a 3-to-1 HCl to HNO3 solution, saturated with CuCl2 at a current density of 0.645 amp/in² (25.4 A/m)

Heat Treatment properties of Inconel 625:

Alloy 625 has three basic heat treatments:

(1)High Solution Anneal - 2000/2200°F (1093/1204°C), air quench or faster.

(2)Low Solution Anneal - 1700/1900°F (927/1038°C), air quench or faster.

(3)Stress Relieve - 1650°F (899°C), air quench.

The time at the above temperatures depends on volume and section thickness. Strip, for example, would require shorter times than large sections. Temperatures for treatments No. 1 and 2 are generally held for 1/2 to 1 hour, 1 to 4 hours for treatment No. 3.

Treatment No. 1 is not commonly used for applications below 1500°F (816°C). It is generally used above 1500°F and where resistance to creep is important. The high solution anneal is also used to develop the maximum softness for mild processing operations such as cold rolling or drawing.

Treatment No. 2 is the used treatment and develops an optimum combination of tensile and rupture properties from ambient temperatures to 1900°F (1038°C). Ductility and toughness at cryogenic temperatures are also very good.

Treatment No. 3 is recommended for application below 1200°F (649°C) when maximum fatigue, hardness, tensile and yield strength properties are desired. Ductility and toughness at cryogenic temperatures are excellent. When a fine grain size is desired for fatigue, tensile and yield strengths up to 1500°F (816°C), treatment No. 3 is sometimes used.

Hot Working properties of Inconel 625 Round Bars Manufacturer:

Hot working may done at 2100°F (1149°C) maximum furnace temperature. Care should be exercised to avoid frictional heat build-up which can result in overheating, exceeding 2100°F (1149°C). Alloy 625 becomes very stiff at temperatures below 1850°F (1010°C). Work pieces that fall below this temperature should be reheated. Uniform reductions are recommended to avoid the formation of a duplex grain structure. Approximately 15/20% reduction is recommended for finishing.

Cold Forming properties of Inconel 625 Round Bar Manufacturer:

Alloy 625 can be cold formed by standards methods. When the material becomes too stiff from cold working, ductility can be restored by process anneal.

Machineability properties of Inconel 625 Round Bar Supplier:

Low cutting speeds, rigid tools and work piece, heavy equipment, ample coolant and positive feeds are general recommendations.

Weldability properties of Inconel 625 Round Bars Supplier:

Welding can be accomplished by the gas-shielded processes using a tungsten electrode or a consumable electrode. Postweld heat treatment of the weld are not necessary to maintain corrosion resistance. Heavy restrained sections can be welded and the weld's mechanical properties follow the same trends as base metal properties. Standard practices such as clean surfaces, good joint alignment, U-joints for thicker sections, etc., should be followed.


Other Possible products in Inconel 625 are mentioned below:

Inconel 625 Plate

Inconel 625 Circles

Inconel 625 Strips

Inconel 625 Sheets

Inconel 625 Coil

Inconel 625 Foil

Inconel 625 Plate Shapes

Inconel 625 Custom Profiles

Inconel 625 Fittings

Inconel 625 Elbow

Inconel 625 Equal or Unequal Tee

Inconel 625 Concentric & Eccentric Reducer

Inconel 625 Nipple

Inconel 625 Sleeve

Inconel 625 Union

Inconel 625 Tube

Inconel 625 Tubing

Inconel 625 Pipe

Inconel 625 Bars

Inconel 625 Round Bars

Inconel 625 Flat Bars

Inconel 625 Square Bars

Inconel 625 Rectangular Bars

Inconel 625 Hollow Bars

Inconel 625 Forged Bars

Inconel 625 Machined Bars

Inconel 625 Rings

Inconel 625 Forged Seamless Rings

Inconel 625 Rolled Seamless Rings

Inconel 625 Fasteners

Inconel 625 Bolts

Inconel 625 Nuts

Inconel 625 Screws

Inconel 625 Washers

Inconel 625 Studs

Inconel 625 Flanges

Inconel 625 Welding Products

Inconel 625 Forgings

Inconel 625 Machined Parts

Inconel 625 Welded Components

Inconel 625 Welding Rods

Inconel 625 Welding Electrodes

Inconel 625 Wire Coil

Inconel 625 Wire Rod Spool

UNS N06625 Plate

UNS N06625 Circles

UNS N06625 Strips

UNS N06625 Sheets

UNS N06625 Coil

UNS N06625 Foil

UNS N06625 Plate Shapes

UNS N06625 Custom Profiles

UNS N06625 Fittings

UNS N06625 Elbow

UNS N06625 Equal or Unequal Tee

UNS N06625 Concentric & Eccentric Reducer

UNS N06625 Nipple

UNS N06625 Sleeve

UNS N06625 Union

UNS N06625 Tube

UNS N06625 Tubing

UNS N06625 Pipe

UNS N06625 Bars

UNS N06625 Round Bars

UNS N06625 Flat Bars

UNS N06625 Square Bars

UNS N06625 Rectangular Bars

UNS N06625 Hollow Bars

UNS N06625 Forged Bars

UNS N06625 Machined Bars

UNS N06625 Rings

UNS N06625 Forged Seamless Rings

UNS N06625 Rolled Seamless Rings

UNS N06625 Fasteners

UNS N06625 Bolts

UNS N06625 Nuts

UNS N06625 Screws

UNS N06625 Washers

UNS N06625 Studs

UNS N06625 Flanges

UNS N06625 Welding Products

UNS N06625 Forgings

UNS N06625 Machined Parts

UNS N06625 Welded Components

UNS N06625 Welding Rods

UNS N06625 Welding Electrodes

UNS N06625 Wire Coil

UNS N06625 Wire Rod Spool

DIN 2.4856 Plate

DIN 2.4856 Circles

DIN 2.4856 Strips

DIN 2.4856 Sheets

DIN 2.4856 Coil

DIN 2.4856 Foil

DIN 2.4856 Plate Shapes

DIN 2.4856 Custom Profiles

DIN 2.4856 Fittings

DIN 2.4856 Elbow

DIN 2.4856 Equal or Unequal Tee

DIN 2.4856 Concentric & Eccentric Reducer

DIN 2.4856 Nipple

DIN 2.4856 Sleeve

DIN 2.4856 Union

DIN 2.4856 Tube

DIN 2.4856 Tubing

DIN 2.4856 Pipe

DIN 2.4856 Bars

DIN 2.4856 Round Bars

DIN 2.4856 Flat Bars

DIN 2.4856 Square Bars

DIN 2.4856 Rectangular Bars

DIN 2.4856 Hollow Bars

DIN 2.4856 Forged Bars

DIN 2.4856 Machined Bars

DIN 2.4856 Rings

DIN 2.4856 Forged Seamless Rings

DIN 2.4856 Rolled Seamless Rings

DIN 2.4856 Fasteners

DIN 2.4856 Bolts

DIN 2.4856 Nuts

DIN 2.4856 Screws

DIN 2.4856 Washers

DIN 2.4856 Studs

DIN 2.4856 Flanges

DIN 2.4856 Welding Products

DIN 2.4856 Forgings

DIN 2.4856 Machined Parts

DIN 2.4856 Welded Components

DIN 2.4856 Welding Rods

DIN 2.4856 Welding Electrodes

DIN 2.4856 Wire Coil

DIN 2.4856 Wire Rod Spool

NiCr22Mo9Nb Plate

NiCr22Mo9Nb Circles

NiCr22Mo9Nb Strips

NiCr22Mo9Nb Sheets

NiCr22Mo9Nb Coil

NiCr22Mo9Nb Foil

NiCr22Mo9Nb Plate Shapes

NiCr22Mo9Nb Custom Profiles

NiCr22Mo9Nb Fittings

NiCr22Mo9Nb Elbow

NiCr22Mo9Nb Equal or Unequal Tee

NiCr22Mo9Nb Concentric & Eccentric Reducer

NiCr22Mo9Nb Nipple

NiCr22Mo9Nb Sleeve

NiCr22Mo9Nb Union

NiCr22Mo9Nb Tube

NiCr22Mo9Nb Tubing

NiCr22Mo9Nb Pipe

NiCr22Mo9Nb Bars

NiCr22Mo9Nb Round Bars

NiCr22Mo9Nb Flat Bars

NiCr22Mo9Nb Square Bars

NiCr22Mo9Nb Rectangular Bars

NiCr22Mo9Nb Hollow Bars

NiCr22Mo9Nb Forged Bars

NiCr22Mo9Nb Machined Bars

NiCr22Mo9Nb Rings

NiCr22Mo9Nb Forged Seamless Rings

NiCr22Mo9Nb Rolled Seamless Rings

NiCr22Mo9Nb Fasteners

NiCr22Mo9Nb Bolts

NiCr22Mo9Nb Nuts

NiCr22Mo9Nb Screws

NiCr22Mo9Nb Washers

NiCr22Mo9Nb Studs

NiCr22Mo9Nb Flanges

NiCr22Mo9Nb Welding Products

NiCr22Mo9Nb Forgings

NiCr22Mo9Nb Machined Parts

NiCr22Mo9Nb Welded Components

NiCr22Mo9Nb Welding Rods

NiCr22Mo9Nb Welding Electrodes

NiCr22Mo9Nb Wire Coil

NiCr22Mo9Nb Wire Rod Spool

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Inconel 625 Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Review Date
Reviewed Product
Inconel 625 Round Bars Manufacturer in India, 625 Inconel Rods Manufacturer, Alloy 625 Bars Supplier, Inconel 625 Bright Bars Supplier, Inconel 625 Round Bars Supplier in India
Author Rating