Alloy Steel Bar, Alloy Steel Round Bars Supplier | Manufacturer

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Alloy Steel Bar, Alloy Steel Round Bars Manufacturer, supplier, exporter, trader, wholesaler, stockiest in India

Alloy Steel Bars Manufacturer are steels that are alloyed with a variety of elements in total amounts from 0.5% to 50% by weight. Alloy Steel Bars Manufacturer can be categorized into engineering steel (EN Steel), Nitriding Steel, Case Hardening Steel, Oil & Gas Steel, Alloy Spring Steel Bar. Alloy Steel Bars Manufacturer & Supplier can be avail as Concast (CC), Rolled, Forged in normalized, annealed, air or oil hardened (quenched) & tempered condition with black, bright, ground, peeled, proof machined finish. Client can avail VACUUM DEGASSING (VD) route Alloy Steel Bars Manufacturer, Round Bar, Flat Bar, Square Bar, Rectangular Bar, Hollow Bar, Rolled Bar, Forged Bar, Annealed Bar, Hardened & Tempered Bar, Round Corner Bars (RCS), Square Corner Bars (SCS), Rod, Hollow Rods.

Alloy Steel Rolled Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Continuous Casting (CC) -> Rolling -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT)-> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Alloy Steel Forged Bar Manufacturing Process Route:

IF (Induction Furnace) -> Ladle Refining Furnace (LRF) -> Vacuum Degassing (VD) -> Bar Processing (BP) -> Forging -> Normalized or Annealed & Hardened (Quenched) & Tempered (HT / QT) -> Ultra Sonic Testing (UT) -> Machining -> Marking -> Final Inspection -> Packaging -> Dispatch

Cold Drawn or Hot Rolled alloy steel bars are typically annealed or heat treated (quenched and tempered), depending on end use. Heat treating is employed to attain required mechanical properties, typically at the expense of machinability. Heat treated bars are often stress relieved in order to have more precise control of these mechanical properties. 

Alloy has the ability to increase a steel’s hardenability (the depth of hardness that a steel can achieve) through heat treating. Alloying elements do not make the steel inherently any harder; instead they increase the depth to which the steel will harden, enhancing mechanical properties often through the full cross-section of the steel.

This makes it possible to obtain desired mechanical properties in larger sections and use less severe quenching means. This depth of hardness is determined by the alloy elements and type of heat treating used. Other characteristics of alloy steel bars are high strength, fatigue resistance, wear resistance, and toughness. 

Continuous casting, also called strand casting, is the process whereby molten metal is solidified into a “semifinished” billet, bloom, or slab for subsequent rolling in the finishing mills.Prior to the introduction of continuous casting in the 1950s, steel was poured into stationary molds to form ingots. Since then, “continuous casting” has evolved to achieve improved yield, quality, productivity and cost efficiency. It allows lower-cost production of metal sections with better quality, due to the inherently lower costs of continuous, standardised production of a product, as well as providing increased control over the process through automation. This process is used most frequently to cast steel (in terms of tonnage cast). Aluminium and copper are also continuously cast.

Hot Rolled Alloy Steel Bars Supplier are typically annealed or heat treated (quenched and tempered), depending on the end use. Heat treating is employed to attain required mechanical properties, typically at the expense of machinability. Heat treated bars are often stress relieved in order to have more precise control of these mechanical properties. 

It can be ordered as Cold Drawn or Hot Rolled. Cold drawn alloy bars will have a better surface condition and restricted tolerances.

Cold Drawn Alloy Steel Bars Manufacturer are typically annealed or heat treated (quenched and tempered), depending on the end use. Heat treating is employed to attain required mechanical properties, typically at the expense of machinability. Heat treated bars are often stress relieved in order to have more precise control of these mechanical properties. It can be ordered as Cold Drawn or Hot Rolled. Cold Drawn will have a better surface condition and tighter dimensional tolerances as well as increased tensile and yield.

Size Specifications for AlloySteel Billet: 125 x 125, 160 x 160, 200 x 200mm

Size Specifications for Alloy Steel Round Bar & Rods: 6mm upto 550mm

Size Specifications for Alloy Steel Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 3000mm to 6000mm length (can be customized)

Size Specifications for Alloy Steel Hollow Bars & Rod: 50mm upto 1200mm in diameter as welded hollow bars & 2inch to 24inch diameter as seamless hollow bars

Size Specifications for Alloy Steel Hollow Rings: 50mm upto 1200mm in diameter as welded hollow rings & 2inch to 40inch diameter as seamless hollow rings

Client can procure smaller quantities of Alloy Steel Bars online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Various grades alloy steel bars that can be avail from us are as mentioned below:

Other possible grades are as mentioned below:

EN 18CrNiMo7-6, 17CrNiMo6, DIN 1.6587, 17CrNiMo6-7, EN 34CrNiMo6, UNI 35CrNiMo6KB, etc.

Other Possible products in Alloy Steel are mentioned below:

Alloy Steel Bars Manufacturer

Alloy Steel Bars Manufacturer in Mumbai

Alloy Steel Bars Manufacturer in India

Alloy Steel Bars Supplier

Alloy Steel Bars Supplier in Mumbai

Alloy Steel Bars Supplier in India

Alloy Steel Billet
Alloy Steel Concast Billet
Alloy Steel Round Billet
Alloy Steel Square Billet
Alloy Steel Bar (IBR Quality Approved)
Alloy Steel Round Bar (IBR Quality approved)
Alloy Steel Flat Bar
Alloy Steel Square Bar
Alloy Steel Round Corner Square Bar
Alloy Steel RCS Bar
Alloy Steel Straight Corner Square Bar
Alloy Steel SCS Bar
Alloy Steel Hexagonal Bar
Alloy Steel Hollow Bar
Alloy Steel Hex Bar
Alloy Steel Concast Bar
Alloy Steel Forged Bar (IBR Quality Approved)
Alloy Steel Rolled Bar (IBR Quality Approved)
Alloy Steel Black Bar
Alloy Steel Bright Bar
Alloy Steel Peeled Bar
Alloy Steel Machined Bar (Proof Machined)
Alloy Steel Annealed Bar (Spheroidized Annealed)
Alloy Steel Hardened & Tempered (HT) Bar
Alloy Steel Quenched & Tempered (QT) Bar
Alloy Steel Blocks (Square, Rectangular)
Alloy Steel Slabs
Alloy Steel Shafting (Shafts)
Alloy Steel Plate
Alloy Steel Sheet
Alloy Steel Coil
Alloy Steel Circle
Alloy Steel Strip
Alloy Steel Ring (Seamless, Welded, Forged, Rolled)
Alloy Steel Forged Ring (Seamless, Welded)
Alloy Steel Rolled Ring (Seamless, Welded)
Alloy Steel Seamless Ring (Forged, Rolled)
Alloy Steel Welded Ring (Forged, Rolled)
Alloy Steel Tube (Seamless, Welded, IBR, ASTM, ASME)
Alloy Steel Tubing (Seamless, Welded, IBR, ASTM, ASME)
Alloy Steel Pipe (Seamless, Welded, IBR, ASTM, ASME)
Alloy Steel Flange (IBR Approved, ASTM, ASME, API, DIN)
Alloy Steel Slip-On Flange (SO, SORF, SOFF)
Alloy Steel Weld Neck Flange (WN, WNRF, WNFF, WNRTJ)
Alloy Steel Weld necking Flange (WN, WNRF, WNFF, WNRTJ)
Alloy Steel Blind Flange (BL, BLRF, BLFF, BLRTJ)
Alloy Steel Socket weld Flange (SW, SWFF, SWRF, SWRTJ)
Alloy Steel Socket welding Flange (SW, SWFF, SWRF, SWRTJ)
Alloy Steel Threaded Flange (TH, THFF, THRF, THRTJ)
Alloy Steel Lap joint Flange (LJ, LJFF, LJRF)
Alloy Steel Long weld neck Flange (LWN, LWNFF, LWNRF)
Alloy Steel Spectacle Blind Flange
Alloy Steel Plate Flange
Alloy Steel Hub Flange
Alloy Steel Flat Face Flange (FF)
Alloy Steel Raised Face Flange (RF)
Alloy Steel Ring Type Joint Flange (RTJ)
Alloy Steel Flange (CLASS 150, 300, 400, 600, 900, 1500, 2500)
Alloy Steel Fitting
Alloy Steel Buttweld Fitting
Alloy Steel Socket weld Fitting
Alloy Steel Threaded Fitting
Alloy Steel Screwed Fitting
Alloy Steel O'let Fitting
Alloy Steel Branch Connections
Alloy Steel Elbow (Seamless, Welded, 45, 90, 180 Degree, Long, Short Radius)
Alloy Steel Tee (Straight, Reducing, Equal, Unequal)
Alloy Steel Reducer (Concentric, Eccentric)
Alloy Steel Cross (Straight, Reducing)
Alloy Steel Stub In & Stub End (Long, Saddle -Wrap Around)
Alloy Steel Lateral
Alloy Steel End Cap
Alloy Steel Bends
Alloy Steel Swage (Concentric, Eccentric)
Alloy Steel Coupling (Half, Full)
Alloy Steel Street Elbow
Alloy Steel Bushing
Alloy Steel Plug (Round, Square, Hexagon)
Alloy Steel Union
Alloy Steel Hammer Union
Alloy Steel Nipple
Alloy Steel Weldolet (Heavy Wall, Insert, Reducing, Flat)
Alloy Steel Thredolet (Reducing, Flat)
Alloy Steel Threadolet (Reducing, Flat)
Alloy Steel Sockolet (Reducing, Flat)
Alloy Steel Couplet (Female Threaded)
Alloy Steel Elbolet
Alloy Steel Latrolet
Alloy Steel Nipolet
Alloy Steel Sweepolet
Alloy Steel Brazolet
Alloy Steel Expanded Olet
Alloy Steel Flanged Olet
Alloy Steel Flexolet
Alloy Steel Fasteners
Alloy Steel Stud
Alloy Steel Bolt
Alloy Steel Screws
Alloy Steel Nut
Alloy Steel Washer
Alloy Steel Forgings
Alloy Steel Machined Part
Alloy Steel Welded Compenents
Alloy Steel Welding Consumables
Alloy Steel Filler Metal Wire Rod

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Alloy Steel Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.