Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Inconel 625 Round Bars Manufacturer, supplier, exporter, trader, wholesaler, stockiest in india
Inconel 625 Round Bars Manufacturer & Supplier is non magnetic, corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Alloy 625 Rounds Bars Manufacturer has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 Round Bars Supplier is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.
Size Specifications for Inconel 625 Round Bars Manufacturer & Supplier: 6mm upto 260mm
Size Specifications for Inconel 625 Square, Flat, Rectangular Bars Manufacturer & Supplier : 6mm upto 100mm in thickness, 3000mm to 6000mm length(can be Customized)
Size Specifications for Inconel 625 Hollow Bars Manufacturer & Supplier: 50mm upto 400mm in diameter as welded hollow bars & 2inch to 20inch diameter as seamless hollow bars
Size Specifications for Inconel 625 Hollow Rings Manufacturer & Supplier: 50mm upto 400mm in diameter as welded hollow rings & 2inch to 20inch diameter as seamless hollow rings
Chemical Composition (Chemistry) of Inconel 625 Round Bars Manufacturer & Supplier in India:
|
Element |
Min |
Max |
|
Chromium |
20 |
23 |
|
Nickel |
58 |
Balance |
|
Molybdenum |
8 |
10 |
|
Cobalt |
- |
1 |
|
Columbium + Tantalum |
3.15 |
4.15 |
|
Aluminum |
- |
0.4 |
|
Titanium |
- |
0.4 |
|
Carbon |
- |
0.1 |
|
Iron |
- |
5 |
|
Manganese |
- |
0.5 |
|
Silicon |
- |
0.5 |
|
Phosphorus |
- |
0.015 |
|
Sulfur |
- |
0.015 |
Different Designations of Inconel 625:
UNS N06625, ASTM B446, AMS 5666, BS3076, AMS 5837, ASTM B443, AMS 5599, BS3072, ASTM B443, ASTMB444, ASTM B704, AMS 5581, BS3074, GEB50TF133,ASTM B366, DIN 17754, 2.4856
Client can procure smaller quantities of Inconel 625 Round Bars online ready stock from us at any destination by just sending us an email at
Inconel 625 Round Bars
Inconel 625 Round Bars Manufacturer
Inconel 625 Round Bars Supplier
Inconel 625 Round Bars Stockist
Inconel 625 Round Bars Wholeseller
Inconel 625 Round Bars Trader
Inconel 625 Round Bars Dealer
Inconel 625 Round Bars Distributor
Inconel 625 Round Bars in Mumbai
Inconel 625 Round Bars Manufacturer in Mumbai
Inconel 625 Round Bars Supplier in Mumbai
Inconel 625 Round Bars Stockist in Mumbai
Inconel 625 Round Bars Wholeseller in Mumbai
Inconel 625 Round Bars Trader in Mumbai
Inconel 625 Round Bars Dealer in Mumbai
Inconel 625 Round Bars Distributor in Mumbai
Inconel 625 Round Bars in India
Inconel 625 Round Bars Manufacturer in India
Inconel 625 Round Bars Supplier in India
Inconel 625 Round Bars Stockist in India
Inconel 625 Round Bars Wholeseller in India
Inconel 625 Round Bars Trader in India
Inconel 625 Round Bars Dealer in India
Inconel 625 Round Bars Distributor in India
Corrosion Resistance properties of Inconel 625 Round Bars Manufacturer:
Alloy 625 Round Bars Manufacturer has withstood many corrosive environments. In alkaline, salt water, fresh water, neutral salts, and in the air, almost no attack occurs. The nickel and chromium provide resistance to oxidizing environments. Nickel and molybdenum provide for resistance to nonoxidizing atmospheres. Pitting and crevice corrosion are prevented by molybdenum. Niobium stabilizes the alloy against sensitization during welding. Chloride stress-corrosion cracking resistance is excellent. The alloy resists scaling and oxidation at high temperatures.
Pickling properties of Inconel 625 Rod Manufacturer & Supplier:
Sodium hydride baths are necessary to descale this alloy. After the sodium hydride treatment, the material should be immersed in a sulfuric acid bath 165°F (74°C) for approximately 3 minutes. A 25-minute immersion in a nitric-hydrofluoric bath 145°F (63°C) is then necessary. Rinse. Sulfuric solution: 16% by weight, H2SO4. Nitric solution: 8% HNO3 by weight and 3% HF by weight. Acid etching for macro-inspection-expose material electrolytically to a 3-to-1 HCl to HNO3 solution, saturated with CuCl2 at a current density of 0.645 amp/in² (25.4 A/m)
Heat Treatment properties of Inconel 625:
Alloy 625 has three basic heat treatments:
(1)High Solution Anneal - 2000/2200°F (1093/1204°C), air quench or faster.
(2)Low Solution Anneal - 1700/1900°F (927/1038°C), air quench or faster.
(3)Stress Relieve - 1650°F (899°C), air quench.
The time at the above temperatures depends on volume and section thickness. Strip, for example, would require shorter times than large sections. Temperatures for treatments No. 1 and 2 are generally held for 1/2 to 1 hour, 1 to 4 hours for treatment No. 3.
Treatment No. 1 is not commonly used for applications below 1500°F (816°C). It is generally used above 1500°F and where resistance to creep is important. The high solution anneal is also used to develop the maximum softness for mild processing operations such as cold rolling or drawing.
Treatment No. 2 is the used treatment and develops an optimum combination of tensile and rupture properties from ambient temperatures to 1900°F (1038°C). Ductility and toughness at cryogenic temperatures are also very good.
Treatment No. 3 is recommended for application below 1200°F (649°C) when maximum fatigue, hardness, tensile and yield strength properties are desired. Ductility and toughness at cryogenic temperatures are excellent. When a fine grain size is desired for fatigue, tensile and yield strengths up to 1500°F (816°C), treatment No. 3 is sometimes used.
Hot Working properties of Inconel 625 Round Bars Manufacturer:
Hot working may done at 2100°F (1149°C) maximum furnace temperature. Care should be exercised to avoid frictional heat build-up which can result in overheating, exceeding 2100°F (1149°C). Alloy 625 becomes very stiff at temperatures below 1850°F (1010°C). Work pieces that fall below this temperature should be reheated. Uniform reductions are recommended to avoid the formation of a duplex grain structure. Approximately 15/20% reduction is recommended for finishing.
Cold Forming properties of Inconel 625 Round Bar Manufacturer:
Alloy 625 can be cold formed by standards methods. When the material becomes too stiff from cold working, ductility can be restored by process anneal.
Machineability properties of Inconel 625 Round Bar Supplier:
Low cutting speeds, rigid tools and work piece, heavy equipment, ample coolant and positive feeds are general recommendations.
Weldability properties of Inconel 625 Round Bars Supplier:
Welding can be accomplished by the gas-shielded processes using a tungsten electrode or a consumable electrode. Postweld heat treatment of the weld are not necessary to maintain corrosion resistance. Heavy restrained sections can be welded and the weld's mechanical properties follow the same trends as base metal properties. Standard practices such as clean surfaces, good joint alignment, U-joints for thicker sections, etc., should be followed.
Other Possible products in Inconel 625 are mentioned below:
Inconel 625 Plate
Inconel 625 Circles
Inconel 625 Strips
Inconel 625 Sheets
Inconel 625 Coil
Inconel 625 Foil
Inconel 625 Plate Shapes
Inconel 625 Custom Profiles
Inconel 625 Fittings
Inconel 625 Elbow
Inconel 625 Equal or Unequal Tee
Inconel 625 Concentric & Eccentric Reducer
Inconel 625 Nipple
Inconel 625 Sleeve
Inconel 625 Union
Inconel 625 Tube
Inconel 625 Tubing
Inconel 625 Pipe
Inconel 625 Bars
Inconel 625 Round Bars
Inconel 625 Flat Bars
Inconel 625 Square Bars
Inconel 625 Rectangular Bars
Inconel 625 Hollow Bars
Inconel 625 Forged Bars
Inconel 625 Machined Bars
Inconel 625 Rings
Inconel 625 Forged Seamless Rings
Inconel 625 Rolled Seamless Rings
Inconel 625 Fasteners
Inconel 625 Bolts
Inconel 625 Nuts
Inconel 625 Screws
Inconel 625 Washers
Inconel 625 Studs
Inconel 625 Flanges
Inconel 625 Welding Products
Inconel 625 Forgings
Inconel 625 Machined Parts
Inconel 625 Welded Components
Inconel 625 Welding Rods
Inconel 625 Welding Electrodes
Inconel 625 Wire Coil
Inconel 625 Wire Rod Spool
UNS N06625 Plate
UNS N06625 Circles
UNS N06625 Strips
UNS N06625 Sheets
UNS N06625 Coil
UNS N06625 Foil
UNS N06625 Plate Shapes
UNS N06625 Custom Profiles
UNS N06625 Fittings
UNS N06625 Elbow
UNS N06625 Equal or Unequal Tee
UNS N06625 Concentric & Eccentric Reducer
UNS N06625 Nipple
UNS N06625 Sleeve
UNS N06625 Union
UNS N06625 Tube
UNS N06625 Tubing
UNS N06625 Pipe
UNS N06625 Bars
UNS N06625 Round Bars
UNS N06625 Flat Bars
UNS N06625 Square Bars
UNS N06625 Rectangular Bars
UNS N06625 Hollow Bars
UNS N06625 Forged Bars
UNS N06625 Machined Bars
UNS N06625 Rings
UNS N06625 Forged Seamless Rings
UNS N06625 Rolled Seamless Rings
UNS N06625 Fasteners
UNS N06625 Bolts
UNS N06625 Nuts
UNS N06625 Screws
UNS N06625 Washers
UNS N06625 Studs
UNS N06625 Flanges
UNS N06625 Welding Products
UNS N06625 Forgings
UNS N06625 Machined Parts
UNS N06625 Welded Components
UNS N06625 Welding Rods
UNS N06625 Welding Electrodes
UNS N06625 Wire Coil
UNS N06625 Wire Rod Spool
DIN 2.4856 Plate
DIN 2.4856 Circles
DIN 2.4856 Strips
DIN 2.4856 Sheets
DIN 2.4856 Coil
DIN 2.4856 Foil
DIN 2.4856 Plate Shapes
DIN 2.4856 Custom Profiles
DIN 2.4856 Fittings
DIN 2.4856 Elbow
DIN 2.4856 Equal or Unequal Tee
DIN 2.4856 Concentric & Eccentric Reducer
DIN 2.4856 Nipple
DIN 2.4856 Sleeve
DIN 2.4856 Union
DIN 2.4856 Tube
DIN 2.4856 Tubing
DIN 2.4856 Pipe
DIN 2.4856 Bars
DIN 2.4856 Round Bars
DIN 2.4856 Flat Bars
DIN 2.4856 Square Bars
DIN 2.4856 Rectangular Bars
DIN 2.4856 Hollow Bars
DIN 2.4856 Forged Bars
DIN 2.4856 Machined Bars
DIN 2.4856 Rings
DIN 2.4856 Forged Seamless Rings
DIN 2.4856 Rolled Seamless Rings
DIN 2.4856 Fasteners
DIN 2.4856 Bolts
DIN 2.4856 Nuts
DIN 2.4856 Screws
DIN 2.4856 Washers
DIN 2.4856 Studs
DIN 2.4856 Flanges
DIN 2.4856 Welding Products
DIN 2.4856 Forgings
DIN 2.4856 Machined Parts
DIN 2.4856 Welded Components
DIN 2.4856 Welding Rods
DIN 2.4856 Welding Electrodes
DIN 2.4856 Wire Coil
DIN 2.4856 Wire Rod Spool
NiCr22Mo9Nb Plate
NiCr22Mo9Nb Circles
NiCr22Mo9Nb Strips
NiCr22Mo9Nb Sheets
NiCr22Mo9Nb Coil
NiCr22Mo9Nb Foil
NiCr22Mo9Nb Plate Shapes
NiCr22Mo9Nb Custom Profiles
NiCr22Mo9Nb Fittings
NiCr22Mo9Nb Elbow
NiCr22Mo9Nb Equal or Unequal Tee
NiCr22Mo9Nb Concentric & Eccentric Reducer
NiCr22Mo9Nb Nipple
NiCr22Mo9Nb Sleeve
NiCr22Mo9Nb Union
NiCr22Mo9Nb Tube
NiCr22Mo9Nb Tubing
NiCr22Mo9Nb Pipe
NiCr22Mo9Nb Bars
NiCr22Mo9Nb Round Bars
NiCr22Mo9Nb Flat Bars
NiCr22Mo9Nb Square Bars
NiCr22Mo9Nb Rectangular Bars
NiCr22Mo9Nb Hollow Bars
NiCr22Mo9Nb Forged Bars
NiCr22Mo9Nb Machined Bars
NiCr22Mo9Nb Rings
NiCr22Mo9Nb Forged Seamless Rings
NiCr22Mo9Nb Rolled Seamless Rings
NiCr22Mo9Nb Fasteners
NiCr22Mo9Nb Bolts
NiCr22Mo9Nb Nuts
NiCr22Mo9Nb Screws
NiCr22Mo9Nb Washers
NiCr22Mo9Nb Studs
NiCr22Mo9Nb Flanges
NiCr22Mo9Nb Welding Products
NiCr22Mo9Nb Forgings
NiCr22Mo9Nb Machined Parts
NiCr22Mo9Nb Welded Components
NiCr22Mo9Nb Welding Rods
NiCr22Mo9Nb Welding Electrodes
NiCr22Mo9Nb Wire Coil
NiCr22Mo9Nb Wire Rod Spool
Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Inconel 625 Round Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.
