Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading DIN 1.2714 Hot Die Steel Bar & Rods supplier, exporter, trader, wholesaler, stockiest.
The 55NiCrMoV7 steel is a low alloyed hot work tool steel according to DIN standard, and 1.2714 steel is as per W-Nr Germany standard. This material has very good high temperature toughness with shock and fatigue strength characteristics. It also has good hardening properties.
Chemical Composition (Chemistry) of DIN 1.2714 Hot Die Steel Blocks & Bars:
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
|
0.5 - 0.6 |
0.1 - 0.4 |
0.6 - 0.9 |
1.5 - 1.8 |
max 0.03 |
max 0.03 |
0.8 - 1.2 |
0.35 - 0.55 |
0.05 - 0.15 |
DIN 1.2714 / 55NiCrMoV7 Tool Steel Size Available (Length can be customized):
– As Forged
Round bar
Size: Dia.80-1,000mm
Length: 3,000-10,000mm
Square bar
Size: 150×150-600×600mm
Length: 3,000-8,000mm
(Forged Flat Bars, Shafts, Rollers and Blocks can be Customized)
– As Rolled
Round Bar
Size: Dia.10-300mm
Length: 3,000-10,000mm (Can be Customized)
Different Designations of DIN 1.2714 Hot Die Steel Blocks & Bars :
EU EN: 55NiCrMoV7
USA AISI: L6
Germany DIN,WNr: 55NiCrMoV6, 56NiCrMoV7
Japan JIS: SKT4
France AFNOR: 55NCDV7
England BS: BH224-5
Italy UNI: 44NiCrMoV7-KU, 56NiCrMoV7-KU
China GB: 5CrNiMo
Poland PN: WNL, WNLV
Czechia CSN: 19662, 19663
Austria ONORM: W501, W502
Russia GOST: 5KHNM, 5KHNV
Inter ISO: 55NiCrMoV7
Client can procure smaller quantities of DIN 1.2714 Hot Die Steel Blocks & Bars online ready stock from us at any destination by just sending us an email at
Surface Condition of DIN 1.2714 Hot Die Steel Blocks & Bars:
1) Black, Peeled, Turned, Grinded
2) 55NiCrMoV7 tool steel should be free of heavy scale, deep pitting, laps, porosity, injurious segregations, excessive non-metallic inclusions, seams, cracks, slivers, scale marks, dents, soft and hard spots, pipes or any defects that would detrimentally affect the suitability of 1.2714 steel.
3) Visual examination for 1.2714 steel shall be made to ensure compliance with the requirements for workmanship, finish, dimensions and tolerances, identification marking and packaging.
Straightness of DIN 1.2714 Hot Die Steel Blocks & Bars:
The permissible deviation of 55NiCrMoV7 tool steel shall not exceed 3mm in 1000mm length.This applies also to bars under 1000mm in length.Measurement is taken on the concave side of this grade with a straight edge.
Hardness of DIN 1.2714 Hot Die Steel Blocks & Bars:
DIN 1.2714 tool steel annealed hardness values when obtained in accordance with the latest issue of test methods and definitions A370 shall not exceed 255 Brinell.
Heat Treatment of DIN 1.2714 Hot Die Steel Blocks & Bars:
1) Annealing
Heat uniformly to 740-760°C. Soak well and cool slowly in the furnace.
2) Hardening
Preheat 1.2714 steel to 600-700°C,then increase to the hardening temperature of 850-880°C. Air or oil quenched. The 55NiCrMoV7 should be tempered once they become hand-warm.
3) Tempering
DIN 1.2714 steel should be done with the least possible delay after hardening.Select a suitable tempering temperature, heat slowly and uniformly.When it has reached the desired temperature, soak for at least one hour per 25mm of whole dia.Double tempering is recommended.The second tempering should be a repetition of the first.
Other Possible products in Hot Work Tool Steel 1.2714 are mentioned below:
Hot Die Steel 1.2714 Plates
Hot Die Steel 1.2714 Circles
Hot Die Steel 1.2714 Plate Shapes
Hot Die Steel 1.2714 Custom Profiles
Hot Die Steel 1.2714 Patta
Hot Die Steel 1.2714 Patti
Hot Die Steel 1.2714 Rods
Hot Die Steel 1.2714 Blooms
Hot Die Steel 1.2714 Billets
Hot Die Steel 1.2714 Bar
Hot Die Steel 1.2714 Round Bars
Hot Die Steel 1.2714 Flat Bars
Hot Die Steel 1.2714 Round Corner Square Bars
Hot Die Steel 1.2714 RCS Bars
Hot Die Steel 1.2714 Straight Corner Square Bars
Hot Die Steel 1.2714 SCS Bars
Hot Die Steel 1.2714 Square Bars
Hot Die Steel 1.2714 Rectangular Bars
Hot Die Steel 1.2714 Hexagonal Bars
Hot Die Steel 1.2714 Forged Bars
Hot Die Steel 1.2714 Rolled Bars
Hot Die Steel 1.2714 Black Bars
Hot Die Steel 1.2714 Bright Bars
Hot Die Steel 1.2714 Blocks
Hot Die Steel 1.2714 Slabs
Hot Die Steel 1.2714 Shafts
Hot Die Steel 1.2714 Proof Machined Bars
Hot Die Steel 1.2714 Forgings
Hot Die Steel 1.2714 Rings
Hot Die Steel 1.2714 Forged Seamless Rings
Hot Die Steel 1.2714 Rolled Seamless Rings
Hot Die Steel 1.2714 Machined Parts
DIN 1.2714 Die Blocks
DIN, WNr 55NiCrMoV6 Plates
DIN, WNr 55NiCrMoV6 Circles
DIN, WNr 55NiCrMoV6 Plate Shapes
DIN, WNr 55NiCrMoV6 Custom Profiles
DIN, WNr 55NiCrMoV6 Patta
DIN, WNr 55NiCrMoV6 Patti
DIN, WNr 55NiCrMoV6 Rods
DIN, WNr 55NiCrMoV6 Blooms
DIN, WNr 55NiCrMoV6 Billets
DIN, WNr 55NiCrMoV6 Bar
DIN, WNr 55NiCrMoV6 Round Bars
DIN, WNr 55NiCrMoV6 Flat Bars
DIN, WNr 55NiCrMoV6 Square Bars
DIN, WNr 55NiCrMoV6 Rectangular Bars
DIN, WNr 55NiCrMoV6 Hexagonal Bars
DIN, WNr 55NiCrMoV6 Forged Bars
DIN, WNr 55NiCrMoV6 Rolled Bars
DIN, WNr 55NiCrMoV6 Black Bars
DIN, WNr 55NiCrMoV6 Bright Bars
DIN, WNr 55NiCrMoV6 Blocks
DIN, WNr 55NiCrMoV6 Shafts
DIN, WNr 55NiCrMoV6 Proof Machined Bars
DIN, WNr 55NiCrMoV6 Forgings
DIN, WNr 55NiCrMoV6 Rings
DIN, WNr 55NiCrMoV6 Forged Seamless Rings
DIN, WNr 55NiCrMoV6 Rolled Seamless Rings
DIN, WNr 55NiCrMoV6 Machined Parts
DIN, Wnr 55NiCrMoV6 Die Blocks
DIN, WNr 55NiCrMoV7 Plates
DIN, WNr 55NiCrMoV7 Circles
DIN, WNr 55NiCrMoV7 Plate Shapes
DIN, WNr 55NiCrMoV7 Custom Profiles
DIN, WNr 55NiCrMoV7 Patta
DIN, WNr 55NiCrMoV7 Patti
DIN, WNr 55NiCrMoV7 Rods
DIN, WNr 55NiCrMoV7 Blooms
DIN, WNr 55NiCrMoV7 Billets
DIN, WNr 55NiCrMoV7 Bar
DIN, WNr 55NiCrMoV7 Round Bars
DIN, WNr 55NiCrMoV7 Flat Bars
DIN, WNr 55NiCrMoV7 Square Bars
DIN, WNr 55NiCrMoV7 Rectangular Bars
DIN, WNr 55NiCrMoV7 Hexagonal Bars
DIN, WNr 55NiCrMoV7 Forged Bars
DIN, WNr 55NiCrMoV7 Rolled Bars
DIN, WNr 55NiCrMoV7 Black Bars
DIN, WNr 55NiCrMoV7 Bright Bars
DIN, WNr 55NiCrMoV7 Blocks
DIN, WNr 55NiCrMoV7 Shafts
DIN, WNr 55NiCrMoV7 Proof Machined Bars
DIN, WNr 55NiCrMoV7 Forgings
DIN, WNr 55NiCrMoV7 Rings
DIN, WNr 55NiCrMoV7 Forged Seamless Rings
DIN, WNr 55NiCrMoV7 Rolled Seamless Rings
DIN, WNr 55NiCrMoV7 Machined Parts
DIN, Wnr 55NiCrMoV7 Die Blocks
AFNOR 55NCDV7 Plates
AFNOR 55NCDV7 Circles
AFNOR 55NCDV7 Plate Shapes
AFNOR 55NCDV7 Custom Profiles
AFNOR 55NCDV7 Patta
AFNOR 55NCDV7 Patti
AFNOR 55NCDV7 Rods
AFNOR 55NCDV7 Blooms
AFNOR 55NCDV7 Billets
AFNOR 55NCDV7 Bar
AFNOR 55NCDV7 Round Bars
AFNOR 55NCDV7 Flat Bars
AFNOR 55NCDV7 Square Bars
AFNOR 55NCDV7 Rectangular Bars
AFNOR 55NCDV7 Hexagonal Bars
AFNOR 55NCDV7 Forged Bars
AFNOR 55NCDV7 Rolled Bars
AFNOR 55NCDV7 Black Bars
AFNOR 55NCDV7 Bright Bars
AFNOR 55NCDV7 Blocks
AFNOR 55NCDV7 Shafts
AFNOR 55NCDV7 Proof Machined Bars
AFNOR 55NCDV7 Forgings
AFNOR 55NCDV7 Rings
AFNOR 55NCDV7 Forged Seamless Rings
AFNOR 55NCDV7 Rolled Seamless Rings
AFNOR 55NCDV7 Machined Parts
AFNOR 55NCDV7 Die Blocks
Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of DIN 1.2714 Hot Die Steel Blocks & Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.
