Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Tool Steel D2 Round & Flat Bars supplier, exporter, trader, wholesaler, stockiest.
D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer a hardness in the range 55-62 HRC, and is machinable in the annealed condition. D2 steel shows little distortion on correct hardening. D2 steel’s high chromium content gives it mild corrosion resisting properties in the hardened condition.
Size Specifications for D2 Tool Steel Round Bars: 6mm upto 450mm
Size Specifications for D2 Tool Steel Square, Flat, Rectangular Bars: 6mm upto 300mm in thickness, 500mm to 6000mm length(can be Customized)
Size Specifications for D2 Tool Steel Hollow Bars: 50mm upto 600mm in diameter as welded hollow bars & 2inch to 20inch diameter as seamless hollow bars
Size Specifications for D2 Tool Steel Hollow Rings: 50mm upto 1000mm in diameter as welded hollow rings & 2inch to 30inch diameter as seamless hollow rings
Chemical Composition (Chemistry) of Tool Steel D2 Round & Flat Bars:
|
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
|
1.45 - 1.6 |
0.1 - 0.6 |
0.2 - 0.6 |
max 0.03 |
max 0.03 |
11 - 13 |
0.7 - 1 |
0.7 - 1 |
Different Designations of Tool Steel AISI D2:
Germany: DIN 1.2379
Italy: UNI KU
United Kingdom: B.S. BD 2
United States: ASTM A681 , FED QQ-T-570 , SAE J437 , SAE J438 , UNS T30402
EU EN: X153CrMoV12
Germany DIN, WNr: X155CrVMo12-1
Typical applications for D2 Tool Steel:
Stamping or Forming Dies
Punches
Forming Rolls
Knives, slitters, shear blades
Tools
Scrap choppers
Tyre shredders
Client can procure smaller quantities of Tool Steel D2 Round & Flat Bars online ready stock from us at any destination by just sending us an email at
Forging properties of D2 Tool Steel:
Heat slowly and uniformly to 700°C then more rapidly to 900/1040°C. Do not continue to forge D2 below 925°C. Reheat as often as necessary to maintain proper forging temperature. After forging cool slowly. This is not an annealing process. After the forging is cold, it must be annealed as described below.
Annealing properties of D2 Tool Steel:
Heat uniformly to 843/871°C, then slow furnace cool at a rate of not more than 10°C per hour. After annealing D2 a maximum hardness of 240 Brinell may be achieved
Hardening properties of D2 Tool Steel:
D2 tool steel is extremely sensitive to overheating during hardening – do not overheat.
Pre heat slowly to 750/780°C and soak. Continue heating to the final hardening temperature of 1000/1030°C and allow the component to equalise. Quench in oil or cool in air.
Tempering properties of D2 Tool Steel:
Heat uniformly and thoroughly to the desired temperature and hold for 25 minutes per cm of thickness. D2 can be double tempering at approximately 15°C below the first tempering, after intermediate cooling to room temperature.
Other Possible products in Tool Steel D2 are mentioned below:
Tool Steel D2 Plate
Tool Steel D2 Circles
Tool Steel D2 Strips
Tool Steel D2 Sheets
Tool Steel D2 Plate Shapes
Tool Steel D2 Custom Profiles
Tool Steel D2 Billets
Tool Steel D2 Bars
Tool Steel D2 Round Bars
Tool Steel D2 Flat Bars
Tool Steel D2 Square Bars
Tool Steel D2 Rectangular Bars
Tool Steel D2 Hollow Bars
Tool Steel D2 Forged Bars
Tool Steel D2 Machined Bars
Tool Steel D2 Bars Offcuts
Tool Steel D2 Bars Cut Pieces
Tool Steel D2 Slabs
Tool Steel D2 Blocks
Tool Steel D2 Rings
Tool Steel D2 Forged Seamless Rings
Tool Steel D2 Rolled Seamless Rings
Tool Steel D2 Forgings
Tool Steel D2 Machined Parts
DIN 1.2379 Tool Steel Plate
DIN 1.2379 Tool Steel Circles
DIN 1.2379 Tool Steel Strips
DIN 1.2379 Tool Steel Sheets
DIN 1.2379 Tool Steel Plate Shapes
DIN 1.2379 Tool Steel Custom Profiles
DIN 1.2379 Tool Steel Billets
DIN 1.2379 Tool Steel Bars
DIN 1.2379 Tool Steel Round Bars
DIN 1.2379 Tool Steel Flat Bars
DIN 1.2379 Tool Steel Square Bars
DIN 1.2379 Tool Steel Rectangular Bars
DIN 1.2379 Tool Steel Hollow Bars
DIN 1.2379 Tool Steel Forged Bars
DIN 1.2379 Tool Steel Machined Bars
DIN 1.2379 Tool Steel Bars Offcuts
DIN 1.2379 Tool Steel Bars Cut Pieces
DIN 1.2379 Tool Steel Slabs
DIN 1.2379 Tool Steel Blocks
DIN 1.2379 Tool Steel Rings
DIN 1.2379 Tool Steel Forged Seamless Rings
DIN 1.2379 Tool Steel Rolled Seamless Rings
DIN 1.2379 Tool Steel Forgings
DIN 1.2379 Tool Steel Machined Parts
Tool Steel X155CrVMo12-1 Plate
Tool Steel X155CrVMo12-1 Circles
Tool Steel X155CrVMo12-1 Strips
Tool Steel X155CrVMo12-1 Sheets
Tool Steel X155CrVMo12-1 Plate Shapes
Tool Steel X155CrVMo12-1 Custom Profiles
Tool Steel X155CrVMo12-1 Billets
Tool Steel X155CrVMo12-1 Bars
Tool Steel X155CrVMo12-1 Round Bars
Tool Steel X155CrVMo12-1 Flat Bars
Tool Steel X155CrVMo12-1 Square Bars
Tool Steel X155CrVMo12-1 Rectangular Bars
Tool Steel X155CrVMo12-1 Hollow Bars
Tool Steel X155CrVMo12-1 Forged Bars
Tool Steel X155CrVMo12-1 Machined Bars
Tool Steel X155CrVMo12-1 Bars Offcuts
Tool Steel X155CrVMo12-1 Bars Cut Pieces
Tool Steel X155CrVMo12-1 Slabs
Tool Steel X155CrVMo12-1 Blocks
Tool Steel X155CrVMo12-1 Rings
Tool Steel X155CrVMo12-1 Forged Seamless Rings
Tool Steel X155CrVMo12-1 Rolled Seamless Rings
Tool Steel X155CrVMo12-1 Forgings
Tool Steel X155CrVMo12-1 Machined Parts
Tool Steel X153CrMoV12 Plate
Tool Steel X153CrMoV12 Circles
Tool Steel X153CrMoV12 Strips
Tool Steel X153CrMoV12 Sheets
Tool Steel X153CrMoV12 Plate Shapes
Tool Steel X153CrMoV12 Custom Profiles
Tool Steel X153CrMoV12 Billets
Tool Steel X153CrMoV12 Bars
Tool Steel X153CrMoV12 Round Bars
Tool Steel X153CrMoV12 Flat Bars
Tool Steel X153CrMoV12 Square Bars
Tool Steel X153CrMoV12 Rectangular Bars
Tool Steel X153CrMoV12 Hollow Bars
Tool Steel X153CrMoV12 Forged Bars
Tool Steel X153CrMoV12 Machined Bars
Tool Steel X153CrMoV12 Bars Offcuts
Tool Steel X153CrMoV12 Bars Cut Pieces
Tool Steel X153CrMoV12 Slabs
Tool Steel X153CrMoV12 Blocks
Tool Steel X153CrMoV12 Rings
Tool Steel X153CrMoV12 Forged Seamless Rings
Tool Steel X153CrMoV12 Rolled Seamless Rings
Tool Steel X153CrMoV12 Forgings
Tool Steel X153CrMoV12 Machined Parts
Tool Steel SKD11 Plate
Tool Steel SKD11 Circles
Tool Steel SKD11 Strips
Tool Steel SKD11 Sheets
Tool Steel SKD11 Plate Shapes
Tool Steel SKD11 Custom Profiles
Tool Steel SKD11 Billets
Tool Steel SKD11 Bars
Tool Steel SKD11 Round Bars
Tool Steel SKD11 Flat Bars
Tool Steel SKD11 Square Bars
Tool Steel SKD11 Rectangular Bars
Tool Steel SKD11 Hollow Bars
Tool Steel SKD11 Forged Bars
Tool Steel SKD11 Machined Bars
Tool Steel SKD11 Bars Offcuts
Tool Steel SKD11 Bars Cut Pieces
Tool Steel SKD11 Slabs
Tool Steel SKD11 Blocks
Tool Steel SKD11 Rings
Tool Steel SKD11 Forged Seamless Rings
Tool Steel SKD11 Rolled Seamless Rings
Tool Steel SKD11 Forgings
Tool Steel SKD11 Machined Parts
Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Tool Steel D2 Round & Flat Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.
