Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Tool Steel D3 Round Bars & Flat Bars supplier, exporter, trader, wholesaler, stockiest.
D3 steel, also know as 1.2080 (Werkstoff), is an air hardening, high-carbon, high-chromium tool steel. It displays excellent abrasion/wear resistance and has good dimensional stability and high compressive strength.
It is heat treatable and will offer a hardness in the range 58-64 HRC. Due to its abrasion resistance in the hardened condition, D3 machining should be limited to finished grinding.
Size Specifications for D3 Tool Steel Round Bars: 6mm upto 200mm
Size Specifications for D3 Tool Steel Square, Flat, Rectangular Bars: 6mm upto 55mm in thickness, 500mm to 6000mm length(can be Customized)
Size Specifications for D3 Tool Steel Hollow Bars: 50mm upto 200mm in diameter as welded hollow bars & 2inch to 8inch diameter as seamless hollow bars
Size Specifications for D3 Tool Steel Hollow Rings: 50mm upto 1000mm in diameter as welded hollow rings & 2inch to 30inch diameter as seamless hollow rings
Chemical Composition (Chemistry) of Tool Steel D3 Round Bars & Flat Bars:
|
C |
Si |
Mn |
P |
S |
Cr |
|
1.9 - 2.2 |
0.1 - 0.6 |
0.2 - 0.6 |
max 0.03 |
max 0.03 |
11 -13 |
Different Designations of Tool Steel D3:
EU EN: X210Cr12
DIN, WNr: X210Cr12
France: AFNOR Z 200 C 12
Germany: DIN 1.2080
Italy: UNI X 21O Cr 13 KU, X205Cr12KU
China GB: Cr12
Japan: JIS SKD1
United Kingdom: B.S. BD 3
United States: ASTM A681, FED QQ-T-570, SAE J437, SAE J438, UNS T30403
Poland PN: NC11
Czechia CSN: 19436
Austria ONORM: K100
Russia GOST: KH12
Inter ISO: x210Cr12
Typical applications for D3 Tool Steel:
Blanking and forming dies, Forming rolls, Press tools, Punches, Bushes
Client can procure smaller quantities of Tool Steel D3 Round Bars & Flat Bars online ready stock from us at any destination by just sending us an email at
Annealing properties of Tool Steel D3:
Heat uniformly to 850-870°C, soak thoroughly, then slow furnace cool at a rate of not more than 25°C per hour to 650°C. The parts may then be air cooled. This should result in a maximum hardness of brinell 248.
Hardening properties of Tool Steel D3:
D3 tool steel is extremely sensitive to overheating during hardening – do not overheat.
Pre heat slowly to 800-850°C, the raise rapidly to 950-970°C and soak until completely equalised. Quench in oil.
Stress Relieving properties of Tool Steel D3:
Heat to 650-700ºC. Soak for 2-4 hours then furnace cool.
Tempering properties of Tool Steel D3:
Heat uniformly and thoroughly to the desired temperature and hold for 25 minutes per cm of thickness. D3 can be double tempered after intermediate cooling to room temperature.
Other Possible products in Tool Steel D3 are mentioned below:
Tool Steel D3 Plate
Tool Steel D3 Circles
Tool Steel D3 Strips
Tool Steel D3 Sheets
Tool Steel D3 Plate Shapes
Tool Steel D3 Custom Profiles
Tool Steel D3 Billets
Tool Steel D3 Bars
Tool Steel D3 Round Bars
Tool Steel D3 Flat Bars
Tool Steel D3 Square Bars
Tool Steel D3 Rectangular Bars
Tool Steel D3 Hollow Bars
Tool Steel D3 Forged Bars
Tool Steel D3 Machined Bars
Tool Steel D3 Bars Offcuts
Tool Steel D3 Bars Cut Pieces
Tool Steel D3 Slabs
Tool Steel D3 Blocks
Tool Steel D3 Rings
Tool Steel D3 Forged Seamless Rings
Tool Steel D3 Rolled Seamless Rings
Tool Steel D3 Forgings
Tool Steel D3 Machined Parts
DIN 1.2080 Tool Steel Plate
DIN 1.2080 Tool Steel Circles
DIN 1.2080 Tool Steel Strips
DIN 1.2080 Tool Steel Sheets
DIN 1.2080 Tool Steel Plate Shapes
DIN 1.2080 Tool Steel Custom Profiles
DIN 1.2080 Tool Steel Billets
DIN 1.2080 Tool Steel Bars
DIN 1.2080 Tool Steel Round Bars
DIN 1.2080 Tool Steel Flat Bars
DIN 1.2080 Tool Steel Square Bars
DIN 1.2080 Tool Steel Rectangular Bars
DIN 1.2080 Tool Steel Hollow Bars
DIN 1.2080 Tool Steel Forged Bars
DIN 1.2080 Tool Steel Machined Bars
DIN 1.2080 Tool Steel Bars Offcuts
DIN 1.2080 Tool Steel Bars Cut Pieces
DIN 1.2080 Tool Steel Slabs
DIN 1.2080 Tool Steel Blocks
DIN 1.2080 Tool Steel Rings
DIN 1.2080 Tool Steel Forged Seamless Rings
DIN 1.2080 Tool Steel Rolled Seamless Rings
DIN 1.2080 Tool Steel Forgings
DIN 1.2080 Tool Steel Machined Parts
Tool Steel X210Cr12 Plate
Tool Steel X210Cr12 Circles
Tool Steel X210Cr12 Strips
Tool Steel X210Cr12 Sheets
Tool Steel X210Cr12 Plate Shapes
Tool Steel X210Cr12 Custom Profiles
Tool Steel X210Cr12 Billets
Tool Steel X210Cr12 Bars
Tool Steel X210Cr12 Round Bars
Tool Steel X210Cr12 Flat Bars
Tool Steel X210Cr12 Square Bars
Tool Steel X210Cr12 Rectangular Bars
Tool Steel X210Cr12 Hollow Bars
Tool Steel X210Cr12 Forged Bars
Tool Steel X210Cr12 Machined Bars
Tool Steel X210Cr12 Bars Offcuts
Tool Steel X210Cr12 Bars Cut Pieces
Tool Steel X210Cr12 Slabs
Tool Steel X210Cr12 Blocks
Tool Steel X210Cr12 Rings
Tool Steel X210Cr12 Forged Seamless Rings
Tool Steel X210Cr12 Rolled Seamless Rings
Tool Steel X210Cr12 Forgings
Tool Steel X210Cr12 Machined Parts
Tool Steel SKD1 Plate
Tool Steel SKD1 Circles
Tool Steel SKD1 Strips
Tool Steel SKD1 Sheets
Tool Steel SKD1 Plate Shapes
Tool Steel SKD1 Custom Profiles
Tool Steel SKD1 Billets
Tool Steel SKD1 Bars
Tool Steel SKD1 Round Bars
Tool Steel SKD1 Flat Bars
Tool Steel SKD1 Square Bars
Tool Steel SKD1 Rectangular Bars
Tool Steel SKD1 Hollow Bars
Tool Steel SKD1 Forged Bars
Tool Steel SKD1 Machined Bars
Tool Steel SKD1 Bars Offcuts
Tool Steel SKD1 Bars Cut Pieces
Tool Steel SKD1 Slabs
Tool Steel SKD1 Blocks
Tool Steel SKD1 Rings
Tool Steel SKD1 Forged Seamless Rings
Tool Steel SKD1 Rolled Seamless Rings
Tool Steel SKD1 Forgings
Tool Steel SKD1 Machined Parts
Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Tool Steel D3 Round Bars & Flat Bars from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.
