Plate, Sheet, Coil, Strip, Block - Aluminium 7075 Alloy

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading 7075 Aluminium Alloy supplier, exporter, trader, wholesaler, stockiest, retailer, stock holder, distributor, dealer.

Aluminium 7075 is a 7000-series aerospace / aircraft & defence purpose aluminum alloy with zinc as the primary alloying element. It is strong, with a strength comparable to many steels, and has good fatigue strength and average machinability. It has lower resistance to corrosion than many other aluminum alloys, but has significantly better corrosion resistance than the 2000 alloys. Its relatively high cost limits its use.

Similar Specifications for Al 7075: BS 2 L95 Alloy 7075-T651, BS 2 L88 Alloy 7075-T6, BS L160 Alloy 7075-T73511, BS L161 Alloy 7075, BS L162 Alloy 7075, BS L170 Alloy 7075-T6511, DTD 5110 7075, DTD 5124 7075, AMS 4038 7075-T651 Superseded by AMS 4045, AMS 4039 7075-T651 Superseded by AMS 4049, AMS 4044 7075 -0, AMS 4045 7075-T6 & T651, AMS 4046 7075-T6 & T651, AMS 4048 7075-T0, AMS 4049 7075 -T6 & T651, AMS 4078 7075-T351, AMS 4122 7075-T6, AMS 4123 7075-T651, AMS 4124 7075-T7351, AMS 4126 7075-T6, AMS 4131 7075-T74, AMS 4139 7075, AMS 4141 7075-T73, AMS 4147 7075-T7352, AMS 4154 7075-T6, AMS 4166 7075-T73, AMS 4167 7075-T73511, AMS 4168 7075-T6511, AMS 4169 7075-T6511, AMS 4174 7075-T73, AMS 4186 7075-TF, AMS 4187 7075-0, QQ-A-250/13 7075-0, QQ-A-250/13 7075-T6, QQ-A-250/18 7075-0, QQ-A-250/18 7075-T6, QQ-A-250/24 7075-T7651, QQ-A-250/25 7075, QQ-A-250/26 7075, QQ-A-367 Alloy 7075-T6, MIL-A-22771, AIR 9048.690 7075-T7351, AIR 9048.700 7075-T7351, AIR 9048.710 7075-T7351, AIR 9049

Size Specifications for 7075 Aluminium Alloy Round Bar & Rods: 6mm upto 250mm

Dimensions for 7075 Aluminium Alloy Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 1000mm to 2000mm length(can be Customized)

Outer Diameter for 7075 Aluminium Alloy Circle, Blank, Disc: 100mm to 2000mm

Thickness for 7075 Aluminium Alloy Circle, Blanks, Discs: 1.25mm to 150mm

Diameter for 7075 Aluminium Alloy Hollow Bars & Rod: 50mm upto 250mm in diameter as welded hollow bars & 2inch to 10inch diameter as seamless hollow bars

Thickness for 7075 Aluminium Alloy Strip, Block, Patta, Patti: 1.25mm to 150mm

Width for 7075 Aluminium Alloy Strip, Block, Patta, Patti: 25mm to 1500mm

Length for 7075 Aluminium Alloy Strip, Block, Patta, Patti: 100mm to 3000mm(Can be Customized)

Size Range for 7075 Aluminium Alloy Hollow Rings, Washer, Sleeve: 50mm upto 500mm in diameter as welded hollow rings & 2inch to 20inch diameter as seamless hollow rings

Thickness for 7075 Aluminium Alloy Plate, Sheet, Coil: 1.25mm upto 150mm

Width for 7075 Aluminium Alloy Plate, Sheet, Coil: 100mm to 1500mm

Length for 7075 Aluminium Alloy Plate, Sheet, Coil: 100mm to 3000mm

Thickness for Aluminium Alloy 7075 Strip, Block, Patta, Patti: 1.25mm to 150mm

Width for Aluminium Alloy 7075 Strip, Block, Patta, Patti: 25mm to 1500mm

Length for Aluminium Alloy 7075 Strip, Block, Patta, Patti: 100mm to 3000mm(Can be Customized)

7075 Aluminium Alloy chemical composition / chemistry:

Fe

Si

Mn

Cr

Ti

Cu

Mg

Zn

Others

-

max 0.5

max 0.4

max 0.3

0.18 - 0.28

max 0.2

1.2 - 2

2.1 - 2.9

5.1 - 6.1

each 0.05; total 0.15

Al - Rem

Applications of 7075 Aluminium Alloy are Ordnance industries, Aircraft structures, Gears & shafts, Automotive.

Client can procure smaller quantities of 7075 Aluminium Alloys online ready stock from us at premium prices / cost in any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in 7075 Aluminium Alloys are mentioned below:

Aluminium 7075 Bar
Aluminium 7075 Round Bar
Aluminium 7075 Flat Bar
Aluminium 7075 Square Bar
Aluminium 7075 Round Corner Square Bar
Aluminium 7075 RCS Bar
Aluminium 7075 Straight Corner Square Bar
Aluminium 7075 SCS Bar
Aluminium 7075 Hexagonal Bar
Aluminium 7075 Hollow Bar
Aluminium 7075 Hex Bar
Aluminium 7075 Forged Bar
Aluminium 7075 Rolled Bar
Aluminium 7075 Bright Bar
Aluminium 7075 Machined Bar (Proof Machined)
Aluminium 7075 Tempered Bar
Aluminium 7075 Blocks (Square, Rectangular)
Aluminium 7075 Shafting (Shafts)
Aluminium 7075 Plate
Aluminium 7075 Sheet
Aluminium 7075 Coil
Aluminium 7075 Circle
Aluminium 7075 Strip
Aluminium 7075 Ring (Seamless, Welded, Forged, Rolled)
Aluminium 7075 Forged Ring (Seamless, Welded)
Aluminium 7075 Rolled Ring (Seamless, Welded)
Aluminium 7075 Seamless Ring (Forged, Rolled)
Aluminium 7075 Welded Ring (Forged, Rolled)
Aluminium 7075 Tube (Seamless, Welded)
Aluminium 7075 Tubing (Seamless, Welded)
Aluminium 7075 Pipe (Seamless, Welded)
Aluminium 7075 Flange
Aluminium 7075 Fitting
Aluminium 7075 Bushing
Aluminium 7075 Fasteners
Aluminium 7075 Stud
Aluminium 7075 Bolt
Aluminium 7075 Screws
Aluminium 7075 Nut
Aluminium 7075 Washer
Aluminium 7075 Forgings
Aluminium 7075 Machined Part
Aluminium 7075 Welded Components
Aluminium 7075 Welding Consumables
Aluminium 7075 Filler Metal Wire Rod
Aluminium 7075 Rods
Aluminium 7075 Shims (Shim-Sheets)
Aluminium 7075 Wires

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of 7075 Aluminium Alloy from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

European (EU EN)- Fe590-2, Fe690-2, FeD3, FeD4, FeD6, FeE220G, FeE250G, FeE275KGN, FeE275KGTM, FeE275KTN, FeE275KTTM, FeE280G

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading European EU EN equivalent grade materials supplier, exporter, trader, wholesaler, stockiest, dealer, distributor, stock holder.

European EU EN steel equivalent grades & materials each comprising of own chemical information, mechanical properties, physical properties, heat treatment, micro structure, processing performance, performance standards, elevated temperature tensile, stress-rupture, creep properties, residual tensile properties after creep straining, hardness, etc. European (EU EN)- equivalent AS, ONORM ON, NBN, BDS, CSA, GB, CSN, DS, BS, SFS, AFNOR NF, DIN, WNr, NEN, MSZ, IS, ISO, UNI, NS, PN, NP, STAS, GOST, UNE, SS, AISI, ASTM, UNS, JIS, etc. We trade in few of those European EU EN equivalents.

Heat Treatment Processes: Untreated, Normalized, Annealing, Age Hardened, Soft Annealed, Solution Annealed, Isothermal annealing, Normalized and tempered, Hardened and Tempered, Precipitation hardened, Air quenched and tempered, Liquid quenched and tempered, Treated to improve shearability, Cold drawn and stress relieved, Treated to hardness range, Warm worked, Treated to ferrite-pearlite structure and hardness range, Annealed to achieve spheroidization of the carbides, etc.

Different Types of Forging: Hot Forging, Cold Forging, Warm Forging, Open-Die Forging, Electrical Upsetting, Upset Forging

Different Types of European Equivalents Grades that we trade are as listed below:

EU EN DR520, EU EN DR550, EU EN DR550BA, EU EN DR580, EU EN DR620, EU EN Fe310-0, EU EN Fe360B, EU EN Fe360BFN, EU EN Fe360BFU, EU EN Fe360C, EU EN Fe360CKI, EU EN Fe360D1, EU EN Fe360D2, EU EN Fe360DKI, EU EN Fe430B, EU EN Fe430C, EU EN Fe430D1, EU EN Fe430D2, EU EN Fe490-2, EU EN Fe510B, EU EN Fe510C, EU EN Fe510C1KI, EU EN Fe510C2KI, EU EN Fe510D1, EU EN Fe510D1KI, EU EN Fe510D2, EU EN Fe510D2KI, EU EN Fe510DD1, EU EN Fe510DD2, EU EN Fe590-2, EU EN Fe690-2, EU EN FeD3, EU EN FeD4, EU EN FeD6, EU EN FeE220G, EU EN FeE250G, EU EN FeE275KGN, EU EN FeE275KGTM, EU EN FeE275KTN, EU EN FeE275KTTM, EU EN FeE280G, EU EN FeE320G, EU EN FeE350G, EU EN FeE355-TD, EU EN FeE355KGN, EU EN FeE355KGTM, EU EN FeE355KTN, EU EN FeE355KTTM, EU EN FeE360D1, EU EN FeE420-TD, EU EN FeE420KGN, EU EN FeE420KGTM, EU EN FeE420KTN, EU EN FeE420KTTM, EU EN FeE460KGN, EU EN FeE460KGTM, EU EN FeE460KTN, EU EN FeE460KTTM, EU EN FeE460V, EU EN FeE460VKT, EU EN FeE500V, EU EN FeE500VKT, EU EN FeE550G, EU EN FeE550V, EU EN FeE550VKT, EU EN FeE620V, EU EN FeE620VKT, EU EN FeE690VKT, EU EN FeK1, EU EN FeK4, EU EN FeK6, EU EN FeP01, EU EN FeP02G, EU EN FeP03, EU EN FeP03G, EU EN FeP04, EU EN FeP05, EU EN FeP05G, EU EN FeP06, EU EN FeP06G, EU EN FeP07, EU EN S235J2G3, EU EN S235J2G4, EU EN S235JRG2, EU EN S275J2G3, EU EN S275J2G4, EU EN S355J2G1W, EU EN S355J2G2W, EU EN S355J2G3, EU EN S355J2G4, EU EN S355K2G1W, EU EN S355K2G2W, EU EN S355K2G3, EU EN S355K2G4, EU EN T50BA, EU EN T52BA, EU EN T55BA, EU EN T57BA, EU EN T59BA, EU EN T61CA, EU EN T65CA

Different European EU EN Standard Products: Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Slip-On Flange (SO, SORF, SOFF), Weld Necking Flange (WN, WNRF, WNFF, WNRTJ), Blind Flange (BL, BLRF, BLFF, BLRTJ), Socket welding Flange (SW, SWFF, SWRF, SWRTJ), Threaded Flange (TH, THFF, THRF, THRTJ), Lap joint Flange (LJ, LJFF, LJRF), Long weld neck Flange (LWN, LWNFF, LWNRF), Spectacle Blind Flange, Plate Flange, Hub Flange, Flat Face Flange (FF), Raised Face Flange (RF), Ring Type Joint Flange (RTJ), Fitting, Buttweld Fitting, Socket weld Fitting, Threaded Fitting, Screwed Fitting, O'let Fitting, Branch Connections, Elbow (45, 90, 180 Degree, Long, Short Radius), Tee (Straight, Reducing, Equal, Unequal), Reducer (Concentric, Eccentric), Cross (Straight, Reducing), Stub In & Stub End (Long, Saddle -Wrap Around), Lateral, End Cap, Bends, Swage (Concentric, Eccentric), Coupling (Half, Full), Street Elbow, Bushing, Plug (Round, Square, Hexagon), Hammer Union, Nipple, Weldolet (Heavy Wall, Insert, Reducing, Flat), Thredolet, Threadolet, Sockolet, Couplet (Female Threaded), Elbolet, Latrolet, Nipolet, Sweepolet, Brazolet, Expanded Olet, Flanged Olet, Flexolet, Scrap, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed, etc.

Client can procure smaller quantities of European EU EN equivalent products online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply, export of European EU EN Equivalent Materials from associated manufacturers to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island, Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha, Réunion, Romania, Russia Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, Ladakh, Andaman And Nicobar Islands (Union Territory), Port Blair, Andhra Pradesh, Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram, Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Arunachal Pradesh, Itanagar, Assam, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sibsagar, Silchar, Tezpur, Tinsukia, Bihar, Ara, Baruni, Begusarai, Bettiah, Bhagalpur, Bihar Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh (Union Territory), Chandigarh, Chhattisgarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Dadra And Nagar Haveli (Union Territory), Silvassa, Daman And Diu (Union Territory), Daman, Diu, Delhi (National Capital Territory), Delhi, New Delhi, Goa, Madgaon, Panaji, Gujarat, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morvi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Haryana, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurgaon, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Himachal Pradesh, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Jammu And Kashmir, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Leh, Punch, Rajauri, Srinagar, Udhampur, Jharkhand, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Karnataka, Badami, Ballari, Bangalore, Belgavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumkuru, Kerala, Alappuzha, Badagara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Madhya Pradesh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargon, Maheshwar, Mandla, Mandsaur, Mhow, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Maharashtra, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar, Vasai-Virar, Wardha, Yavatmal, Manipur, Imphal, Meghalaya, Cherrapunji, Shillong, Mizoram, Aizawl, Lunglei, Nagaland, Kohima, Mon, Phek, Wokha, Zunheboto, Odisha, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Keonjhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Puducherry (Union Territory), Karaikal, Mahe, Puducherry, Yanam, Punjab, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Rajasthan, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Sikkim, Gangtok, Gyalsing, Lachung, Mangan, Tamil Nadu, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayankottai, Pudukkottai, Rajapalaiyam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Tuticorin, Udhagamandalam, Vellore, Telangana, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Tripura, Agartala, Uttar Pradesh, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Uttarakhand, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, West Bengal, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjiling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Koch Bihar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Navadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh, etc.

Aluminium Alloy 3.4365 - O, T6, T651 Bar, Rod, Circle, Blank, Disc

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Aluminium Alloy DIN 3.4365, Werkstoff 3.4365 Bar & Rod (Temper-O, T6, T651, T7, RRA) supplier, exporter, trader, wholesaler, stockiest, retailer, stock holder, distributor, dealer.

Aluminium alloy 3.4365 can be both hard and coat anodized. T7 temper offers better stress corrosion cracking resistance than temper T6. It is used for Gears, shafts, aircraft aprts, valve parts, low production plastic mould tools, blow moulds for plastic bottles.

Size Specifications for Aluminium Alloy 3.4365 Round Bar & Rods: 3.18mm to 76.2mm

Dimensions for Aluminium Alloy 3.4365 Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 1000mm to 2000mm length (Can be Customized)

Outer Diameter for Aluminium Alloy 3.4365 Circle, Blank, Disc: 100mm to 2000mm

Thickness for Aluminium Alloy 3.4365 Circle, Blanks, Discs: 1.25mm to 150mm

Diameter for Aluminium Alloy 3.4365 Hollow Bars & Rod: 50mm upto 100mm in diameter as welded hollow bars & 2inch to 4inch diameter as seamless hollow bars

Thickness for Aluminium Alloy 3.4365 Strip, Block, Patta, Patti: 1.25mm to 150mm

Width for Aluminium Alloy 3.4365 Strip, Block, Patta, Patti: 25mm to 1500mm

Length for Aluminium Alloy 3.4365 Strip, Block, Patta, Patti: 100mm to 3000mm(Can be Customized)

Size Range for Aluminium Alloy 3.4365 Hollow Rings, Washer, Sleeve: 50mm upto 500mm in diameter as welded hollow rings & 2inch to 20inch diameter as seamless hollow rings

Aluminium Alloy 3.4365 Bar & Rod chemical composition / chemistry:

Fe

Si

Mn

Cr

Ti

Cu

Mg

Zn

Others

-

max 0.5

max 0.4

max 0.3

0.18 - 0.28

max 0.2

1.2 - 2

2.1 - 2.9

5.1 - 6.1

each 0.05; total 0.15

Al - Rem

Applications of Aluminium Alloy 3.4365 Bars & Rods are Ordnance industries, Aircraft structures, Gears & shafts, Automotive.

Client can procure smaller quantities of Aluminium Alloy 3.4365 Bar & Rod online ready stock from us at premium prices / cost in any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in Aluminium Alloy EN AW-3.4365 are mentioned below:

3.4365 Aluminium Bar
3.4365 Aluminium Round Bar
3.4365 Aluminium Flat Bar
3.4365 Aluminium Square Bar
3.4365 Aluminium Round Corner Square Bar
3.4365 Aluminium RCS Bar
3.4365 Aluminium Straight Corner Square Bar
3.4365 Aluminium SCS Bar
3.4365 Aluminium Hexagonal Bar
3.4365 Aluminium Hollow Bar
3.4365 Aluminium Hex Bar
3.4365 Aluminium Forged Bar
3.4365 Aluminium Rolled Bar
3.4365 Aluminium Bright Bar
3.4365 Aluminium Machined Bar (Proof Machined)
3.4365 Aluminium Tempered Bar
3.4365 Aluminium Blocks (Square, Rectangular)
3.4365 Aluminium Shafting (Shafts)
3.4365 Aluminium Plate
3.4365 Aluminium Sheet
3.4365 Aluminium Coil
3.4365 Aluminium Circle
3.4365 Aluminium Strip
3.4365 Aluminium Ring (Seamless, Welded, Forged, Rolled)
3.4365 Aluminium Forged Ring (Seamless, Welded)
3.4365 Aluminium Rolled Ring (Seamless, Welded)
3.4365 Aluminium Seamless Ring (Forged, Rolled)
3.4365 Aluminium Welded Ring (Forged, Rolled)
3.4365 Aluminium Tube (Seamless, Welded)
3.4365 Aluminium Tubing (Seamless, Welded)
3.4365 Aluminium Pipe (Seamless, Welded)
3.4365 Aluminium Flange
3.4365 Aluminium Fitting
3.4365 Aluminium Bushing
3.4365 Aluminium Fasteners
3.4365 Aluminium Stud
3.4365 Aluminium Bolt
3.4365 Aluminium Screws
3.4365 Aluminium Nut
3.4365 Aluminium Washer
3.4365 Aluminium Forgings
3.4365 Aluminium Machined Part
3.4365 Aluminium Welded Components
3.4365 Aluminium Welding Consumables
3.4365 Aluminium Filler Metal Wire Rod
3.4365 Aluminium Rods
3.4365 Aluminium Shims (Shim-Sheets)
3.4365 Aluminium Wires

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Aluminium Alloy ENAW-3.4365 Bars & Rods (Temper-O, T6, T651, T7, RRA) from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Aluminium Alloy AlZn5.5MgCu - O, T6, T651 Bar, Rod, Circle, Blank, Disc

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Aluminium Alloy ENAW-AlZn5.5MgCu Bar & Rod (EU EN, DIN, WNr, ONORM) (Temper-O, T6, T651, T7, RRA) supplier, exporter, trader, wholesaler, stockiest, retailer, stock holder, distributor, dealer.

Aluminium alloy ENAW-AlZn5.5MgCu is European standard designation of aluminium alloy & with the highest strength of all grades of aluminium alloys. It also has moderate corrosion resistance.

Size Specifications for Aluminium Alloy AlZn5.5MgCu Round Bar & Rods: 3.18mm to 76.2mm

Dimensions for Aluminium Alloy AlZn5.5MgCu Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 1000mm to 2000mm length (Can be Customized)

Outer Diameter for Aluminium Alloy AlZn5.5MgCu Circle, Blank, Disc: 100mm to 2000mm

Thickness for Aluminium Alloy AlZn5.5MgCu Circle, Blanks, Discs: 1.25mm to 150mm

Diameter for Aluminium Alloy AlZn5.5MgCu Hollow Bars & Rod: 50mm upto 100mm in diameter as welded hollow bars & 2inch to 4inch diameter as seamless hollow bars

Thickness for Aluminium Alloy AlZn5.5MgCu Strip, Block, Patta, Patti: 1.25mm to 150mm

Width for Aluminium Alloy AlZn5.5MgCu Strip, Block, Patta, Patti: 25mm to 1500mm

Length for Aluminium Alloy AlZn5.5MgCu Strip, Block, Patta, Patti: 100mm to 3000mm(Can be Customized)

Size Range for Aluminium Alloy AlZn5.5MgCu Hollow Rings, Washer, Sleeve: 50mm upto 500mm in diameter as welded hollow rings & 2inch to 20inch diameter as seamless hollow rings

Aluminium Alloy AlZn5.5MgCu Bar & Rod chemical composition / chemistry:

Fe

Si

Mn

Cr

Ti

Cu

Mg

Zn

Others

-

max 0.5

max 0.4

max 0.3

0.18 - 0.28

max 0.2

1.2 - 2

2.1 - 2.9

5.1 - 6.1

each 0.05; total 0.15

Al - Rem

Applications of Aluminium Alloy AlZn5.5MgCu Bars & Rods are Ordnance industries, Aircraft structures, Gears & shafts, Automotive.

Client can procure smaller quantities of Aluminium Alloy AlZn5.5MgCu Bar & Rod online ready stock from us at premium prices / cost in any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in Aluminium Alloy EU EN, DIN, ONORM AlZn5.5MgCu are mentioned below:

ENAW-AlZn5.5MgCu Aluminium Bar
ENAW-AlZn5.5MgCu Aluminium Round Bar
ENAW-AlZn5.5MgCu Aluminium Flat Bar
ENAW-AlZn5.5MgCu Aluminium Square Bar
ENAW-AlZn5.5MgCu Aluminium Round Corner Square Bar
ENAW-AlZn5.5MgCu Aluminium RCS Bar
ENAW-AlZn5.5MgCu Aluminium Straight Corner Square Bar
ENAW-AlZn5.5MgCu Aluminium SCS Bar
ENAW-AlZn5.5MgCu Aluminium Hexagonal Bar
ENAW-AlZn5.5MgCu Aluminium Hollow Bar
ENAW-AlZn5.5MgCu Aluminium Hex Bar
ENAW-AlZn5.5MgCu Aluminium Forged Bar
ENAW-AlZn5.5MgCu Aluminium Rolled Bar
ENAW-AlZn5.5MgCu Aluminium Bright Bar
ENAW-AlZn5.5MgCu Aluminium Machined Bar (Proof Machined)
ENAW-AlZn5.5MgCu Aluminium Tempered Bar
ENAW-AlZn5.5MgCu Aluminium Blocks (Square, Rectangular)
ENAW-AlZn5.5MgCu Aluminium Shafting (Shafts)
ENAW-AlZn5.5MgCu Aluminium Plate
ENAW-AlZn5.5MgCu Aluminium Sheet
ENAW-AlZn5.5MgCu Aluminium Coil
ENAW-AlZn5.5MgCu Aluminium Circle
ENAW-AlZn5.5MgCu Aluminium Strip
ENAW-AlZn5.5MgCu Aluminium Ring (Seamless, Welded, Forged, Rolled)
ENAW-AlZn5.5MgCu Aluminium Forged Ring (Seamless, Welded)
ENAW-AlZn5.5MgCu Aluminium Rolled Ring (Seamless, Welded)
ENAW-AlZn5.5MgCu Aluminium Seamless Ring (Forged, Rolled)
ENAW-AlZn5.5MgCu Aluminium Welded Ring (Forged, Rolled)
ENAW-AlZn5.5MgCu Aluminium Tube (Seamless, Welded)
ENAW-AlZn5.5MgCu Aluminium Tubing (Seamless, Welded)
ENAW-AlZn5.5MgCu Aluminium Pipe (Seamless, Welded)
ENAW-AlZn5.5MgCu Aluminium Flange
ENAW-AlZn5.5MgCu Aluminium Fitting
ENAW-AlZn5.5MgCu Aluminium Bushing
ENAW-AlZn5.5MgCu Aluminium Fasteners
ENAW-AlZn5.5MgCu Aluminium Stud
ENAW-AlZn5.5MgCu Aluminium Bolt
ENAW-AlZn5.5MgCu Aluminium Screws
ENAW-AlZn5.5MgCu Aluminium Nut
ENAW-AlZn5.5MgCu Aluminium Washer
ENAW-AlZn5.5MgCu Aluminium Forgings
ENAW-AlZn5.5MgCu Aluminium Machined Part
ENAW-AlZn5.5MgCu Aluminium Welded Components
ENAW-AlZn5.5MgCu Aluminium Welding Consumables
ENAW-AlZn5.5MgCu Aluminium Filler Metal Wire Rod
ENAW-AlZn5.5MgCu Aluminium Rods
ENAW-AlZn5.5MgCu Aluminium Shims (Shim-Sheets)
ENAW-AlZn5.5MgCu Aluminium Wires

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Aluminium Alloy ENAW-AlZn5.5MgCu Bars & Rods (EU EN, DIN, WNr, ONORM)(Temper-O, T6, T651, T7, RRA) from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Aluminium Alloy 7075 - O, T6, T651 Bar, Rod, Circle, Blank, Disc

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Aluminium Alloy ENAW-7075 Bar & Rods (Temper-O, T6, T651, T7, RRA) supplier, exporter, trader, wholesaler, stockiest, retailer, stock holder, distributor, dealer.

Aluminium alloy ENAW-7075 also known as Zicral, Ergal, and Fortal Constructal. It is furnished in the T6 temper. To achieve this temper, the metal is solution heat-treated and artificially aged until it meets standard mechanical property requirements.

Size Specifications for Aluminium Alloy 7075 Round Bar & Rods: 3.18mm to 76.2mm

Dimensions for Aluminium Alloy 7075 Square, Flat, Rectangular Bars: 6mm upto 150mm in thickness, 1000mm to 2000mm length (Can be Customized)

Outer Diameter for Aluminium Alloy 7075 Circle, Blank, Disc: 100mm to 2000mm

Thickness for Aluminium Alloy 7075 Circle, Blanks, Discs: 1.25mm to 150mm

Diameter for Aluminium Alloy 7075 Hollow Bars & Rod: 50mm upto 100mm in diameter as welded hollow bars & 2inch to 4inch diameter as seamless hollow bars

Thickness for Aluminium Alloy 7075 Strip, Block, Patta, Patti: 1.25mm to 150mm

Width for Aluminium Alloy 7075 Strip, Block, Patta, Patti: 25mm to 1500mm

Length for Aluminium Alloy 7075 Strip, Block, Patta, Patti: 100mm to 3000mm(Can be Customized)

Size Range for Aluminium Alloy 7075 Hollow Rings, Washer, Sleeve: 50mm upto 500mm in diameter as welded hollow rings & 2inch to 20inch diameter as seamless hollow rings

Aluminium Alloy 7075 Bar & Rod chemical composition / chemistry:

Fe

Si

Mn

Cr

Ti

Cu

Mg

Zn

Others

-

max 0.5

max 0.4

max 0.3

0.18 - 0.28

max 0.2

1.2 - 2

2.1 - 2.9

5.1 - 6.1

each 0.05; total 0.15

Al - Rem

Applications of Aluminium Alloy 7075 Bars & Rods are Ordnance industries, Aircraft structures, Gears & shafts, Automotive.

Client can procure smaller quantities of Aluminium Alloy 7075 Bars & Rods online ready stock from us at premium prices / cost in any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Other Possible products in Aluminium Alloy EN AW-7075 are mentioned below:

ENAW-7075 Aluminium Bar
ENAW-7075 Aluminium Round Bar
ENAW-7075 Aluminium Flat Bar
ENAW-7075 Aluminium Square Bar
ENAW-7075 Aluminium Round Corner Square Bar
ENAW-7075 Aluminium RCS Bar
ENAW-7075 Aluminium Straight Corner Square Bar
ENAW-7075 Aluminium SCS Bar
ENAW-7075 Aluminium Hexagonal Bar
ENAW-7075 Aluminium Hollow Bar
ENAW-7075 Aluminium Hex Bar
ENAW-7075 Aluminium Forged Bar
ENAW-7075 Aluminium Rolled Bar
ENAW-7075 Aluminium Bright Bar
ENAW-7075 Aluminium Machined Bar (Proof Machined)
ENAW-7075 Aluminium Tempered Bar
ENAW-7075 Aluminium Blocks (Square, Rectangular)
ENAW-7075 Aluminium Shafting (Shafts)
ENAW-7075 Aluminium Plate
ENAW-7075 Aluminium Sheet
ENAW-7075 Aluminium Coil
ENAW-7075 Aluminium Circle
ENAW-7075 Aluminium Strip
ENAW-7075 Aluminium Ring (Seamless, Welded, Forged, Rolled)
ENAW-7075 Aluminium Forged Ring (Seamless, Welded)
ENAW-7075 Aluminium Rolled Ring (Seamless, Welded)
ENAW-7075 Aluminium Seamless Ring (Forged, Rolled)
ENAW-7075 Aluminium Welded Ring (Forged, Rolled)
ENAW-7075 Aluminium Tube (Seamless, Welded)
ENAW-7075 Aluminium Tubing (Seamless, Welded)
ENAW-7075 Aluminium Pipe (Seamless, Welded)
ENAW-7075 Aluminium Flange
ENAW-7075 Aluminium Fitting
ENAW-7075 Aluminium Bushing
ENAW-7075 Aluminium Fasteners
ENAW-7075 Aluminium Stud
ENAW-7075 Aluminium Bolt
ENAW-7075 Aluminium Screws
ENAW-7075 Aluminium Nut
ENAW-7075 Aluminium Washer
ENAW-7075 Aluminium Forgings
ENAW-7075 Aluminium Machined Part
ENAW-7075 Aluminium Welded Components
ENAW-7075 Aluminium Welding Consumables
ENAW-7075 Aluminium Filler Metal Wire Rod
ENAW-7075 Aluminium Rods
ENAW-7075 Aluminium Shims (Shim-Sheets)
ENAW-7075 Aluminium Wires

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Aluminium Alloy ENAW-7075 Bars & Rods (Temper-O, T6, T651, T7, RRA) from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

Corporate Information

Supply Location

world-map

We can supply or export all over the globe even small quantities by courier/air mode for fastest delivery.

Give us a try. Will transform into life long customer.

Products

Angle, channel, beam, gasket, filter, silencers, valve, flange, fitting, pipe, tube, tubing, plate, sheet, coil, foil, shim, strip, circle, flat, fastener, stud or threaded rod, bolt, nut, washer, screw, rivet, retaining ring, cir-clip, pin, spring, insert, standoff, forgings, machined parts or components, filler wire, etc.