Butt-Weld Fittings Supplier | Manufaturer | Jayant Impex

Butt-Weld Fittings

Butt-Weld Fittings

Butt-Weld Fittings

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading Butt-Weld Pipe Fittings supplier, exporter, trader, wholesaler, stockiest.

A butt-weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, etc.) in a safe and efficient manner, over short or long distances.

Other types of fittings can be threaded or socket welded.

 

Types of Butt-weld Fittings:

Branch Connections: Lateral, Stub-in Short, Stub-in Long, Saddle, Saddle - Wrap Around, Tee – Straight, Tee – Reducing

Bend, Ends & Reducers: Cap, Reducer – Concentric, Reducer – Eccentric, Elbow - 45 Degree Long Radius, Elbow - 45 Degree Long Radius Long Tangent, Elbow - 45 Degree Three Radius, Return - 180 Degree Short Radius, Return - 180 Degree Long Radius, Elbow - 90 Degree Long Radius Buttweld, Elbow - 90 Degree Long Radius Long Tangent, Elbow - 90 Degree Long Radius Reducing, Elbow - 90 Degree Short Radius, Elbow - 90 Degree Short Radius Long Tangent, Elbow - 90 Degree Three Radius,

Swage – Concentric, Swage – Eccentric

Size Range for Butt-Weld Pipe Fittings: ½” to 4” inch from Ready Stock. Above 4” on make to order basis depending on raw material availability.

Client can procure smaller quantities of Butt-Weld Pipe Fitting products online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Advantages of Butt-Weld Pipe Fittings:

Flanges connect pipes by bolting them together, whereas butt weld fittings connect pipes by welding them together.

Depending on size, butt weld fittings require 10% to 75% less material than a flanged connection, which means lower material cost and lower weight.

Welded construction permits greater freedom in designing a layout; this system uses less space, is more compact, and has greater strength.

Butt weld fittings provide optimum flow characteristics, without pockets or sharp corners, creating less frictional resistance, no pressure loss, less turbulence.

 

Possible products in Butt-Weld Pipe Fittings are mentioned below:

Mild Steel (MS) Butt-weld Pipe Fittings

Carbon Steel (CS) Butt-weld Pipe Fittings

Chrome-Molybdenum Alloy Steel Butt-weld Pipe Fittings

Stainless Steel (SS) Butt-weld Pipe Fittings

Duplex Stainless Steel (DSS) Butt-weld Pipe Fittings

Super Duplex Stainless Steel (SDSS) Butt-weld Pipe Fittings

Nickel Butt-weld Pipe Fittings

Inconel Butt-weld Pipe Fittings

Incoloy Butt-weld Pipe Fittings

Hastelloy Butt-weld Pipe Fittings

Monel Butt-weld Pipe Fittings

Titanium Butt-weld Pipe Fittings

Copper Nickel Butt-weld Pipe Fittings

Butt-weld Fittings

Butt-weld Branch Connections

Butt-weld Lateral

Butt-weld Stub-in Short

Butt-weld Stub-in Long

Butt-weld Saddle

Butt-weld Saddle - Wrap Around

Butt-weld Tee - Straight

Butt-weld Tee - Reducing

Butt-weld Bend, Ends & Reducers

Butt-weld Cap

Butt-weld Reducer - Concentric

Butt-weld Reducer - Eccentric

Butt-weld Elbow - 45 Degree, Long Radius

Butt-weld Elbow - 45 Degree, Long Radius, Long Tangent

Butt-weld Elbow - 45 Degree, Three Radius

Butt-weld Return - 180 Degree, Short Radius

Butt-weld Return - 180 Degree, Long Radius

Butt-weld Elbow - 90 Degree, Long Radius, Buttweld

Butt-weld Elbow - 90 Degree, Long Radius, Long Tangent

Butt-weld Elbow - 90 Degree, Long Radius, Reducing

Butt-weld Elbow - 90 Degree, Short Radius

Butt-weld Elbow - 90 Degree, Short Radius, Long Tangent

Butt-weld Elbow - 90 Degree, Three Radius

Butt-weld Swage - Concentric

Butt-weld Swage - Eccentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Fittings

ASTM A350 LF2 Mild Steel (MS) Butt-weld Branch Connections

ASTM A350 LF2 Mild Steel (MS) Butt-weld Lateral

ASTM A350 LF2 Mild Steel (MS) Butt-weld Stub-in Short

ASTM A350 LF2 Mild Steel (MS) Butt-weld Stub-in Long

ASTM A350 LF2 Mild Steel (MS) Butt-weld Saddle

ASTM A350 LF2 Mild Steel (MS) Butt-weld Saddle - Wrap Around

ASTM A350 LF2 Mild Steel (MS) Butt-weld Tee - Straight

ASTM A350 LF2 Mild Steel (MS) Butt-weld Tee - Reducing

ASTM A350 LF2 Mild Steel (MS) Butt-weld Bend, Ends & Reducers

ASTM A350 LF2 Mild Steel (MS) Butt-weld Cap

ASTM A350 LF2 Mild Steel (MS) Butt-weld Reducer - Concentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Reducer - Eccentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 45 Degree, Long Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 45 Degree, Long Radius, Long Tangent

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 45 Degree, Three Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Return - 180 Degree, Short Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Return - 180 Degree, Long Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Long Radius, Buttweld

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Long Radius, Long Tangent

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Long Radius, Reducing

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Short Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Short Radius, Long Tangent

ASTM A350 LF2 Mild Steel (MS) Butt-weld Elbow - 90 Degree, Three Radius

ASTM A350 LF2 Mild Steel (MS) Butt-weld Swage - Concentric

ASTM A350 LF2 Mild Steel (MS) Butt-weld Swage – Eccentric

ASTM A105 Carbon Steel (CS) Butt-weld Fittings

ASTM A105 Carbon Steel (CS) Butt-weld Branch Connections

ASTM A105 Carbon Steel (CS) Butt-weld Lateral

ASTM A105 Carbon Steel (CS) Butt-weld Stub-in Short

ASTM A105 Carbon Steel (CS) Butt-weld Stub-in Long

ASTM A105 Carbon Steel (CS) Butt-weld Saddle

ASTM A105 Carbon Steel (CS) Butt-weld Saddle - Wrap Around

ASTM A105 Carbon Steel (CS) Butt-weld Tee - Straight

ASTM A105 Carbon Steel (CS) Butt-weld Tee - Reducing

ASTM A105 Carbon Steel (CS) Butt-weld Bend, Ends & Reducers

ASTM A105 Carbon Steel (CS) Butt-weld Cap

ASTM A105 Carbon Steel (CS) Butt-weld Reducer - Concentric

ASTM A105 Carbon Steel (CS) Butt-weld Reducer - Eccentric

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 45 Degree, Long Radius

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 45 Degree, Long Radius, Long Tangent

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 45 Degree, Three Radius

ASTM A105 Carbon Steel (CS) Butt-weld Return - 180 Degree, Short Radius

ASTM A105 Carbon Steel (CS) Butt-weld Return - 180 Degree, Long Radius

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Long Radius, Buttweld

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Long Radius, Long Tangent

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Long Radius, Reducing

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Short Radius

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Short Radius, Long Tangent

ASTM A105 Carbon Steel (CS) Butt-weld Elbow - 90 Degree, Three Radius

ASTM A105 Carbon Steel (CS) Butt-weld Swage - Concentric

ASTM A105 Carbon Steel (CS) Butt-weld Swage – Eccentric

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of Butt-Weld Pipe Fittings from associated manufacturer to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Bahamas, Bahrain, Bangladesh, Belgium, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Denmark, Djibouti, Dominica, Ecuador, Egypt, El Salvador, Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guyana, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Mauritius, Mexico, Micronesia, Moldova, Mongolia, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Venezuela, Vietnam, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.